Motorola Bluetooth Headset T305 User Manual

motorola  
BEFOREYOU  
BEGIN  
®
Portable Bluetooth  
Hands-Free Speaker  
Before using this product, read the Im portant Safety and  
Legal Inform ation pam phlet and follow its instructions.  
Take a moment before you get started to  
familiarize yourself with your new  
T305 Portable Bluetooth Hands-Free Speaker.  
Speaker  
Multi-Color  
Indicator Light  
and Call Button  
Volume  
Up (+)  
Button  
Volume  
Down (-)  
Button  
(on side)  
Power  
Microphone  
Button  
T305  
Get connected in 4 quick steps.  
CHARGEYOUR  
START BLUETOOTH  
2
1
FEATURE  
HANDS-FREE SPEAKER  
Your Phone  
Charge your hands-free speaker's battery for  
2 hours:  
Your phone's Bluetooth feature is off by default.  
To use your hands-free speaker, you must turn  
on the Bluetooth feature in your phone.  
Charging  
Port  
For most Motorola phones (at the main menu):  
Press  
(Menu) > Settings > Connection >  
1
M
Note: Do not place hands-free speaker with clip installed  
on visor when charging.  
Bluetooth Link > Setup.  
Scroll to Power.  
Select Change.  
Scroll to On.  
Plug the Motorola charger into the charging  
port on the end of the hands-free speaker.  
1
2
2
3
4
5
The indicator light turns steadily red when the  
battery is charging and the hands-free speaker  
is turned off. It may take up to 1 minute for the  
indicator light to turn on. When the hands-free  
speaker's battery is fully charged (about 2  
hours), the indicator light turns steadily blue.  
Press Select to turn on the Bluetooth  
feature. The Bluetooth feature remains on  
until you turn the feature off.  
Disconnect the charger.  
Note: Hands-free speaker is functional while charging;  
however, when charging the hands-free speaker while turned  
on, the indicator light does not provide charging status.  
Note: These steps are for most Motorola phones. For  
other phones, see your phone's user's guide.  
TROUBLESHOOTING  
USING YOUR T305  
My hands-free speaker will not enter pairing  
mode.  
See  
Make sure that any devices previously paired with  
the hands-free speaker are turned off. If the  
indicator light is flashing in blue, turn off the other  
device and wait for 10 seconds.The indicator light  
becomes steadily lit in blue indicating the  
hands-free speaker is now in pairing mode.  
Features and  
Functions Guide  
on the reverse side  
for information on  
using yourT305  
My phone does not find my hands-free speaker.  
Make sure the indicator light on your hands-free  
speaker is on and steadily lit in blue when your  
phone is searching for devices (see step 3).  
My hands-free speaker worked with my phone  
before but now they are not working.  
Make sure your phone is on and the Bluetooth  
feature is turned on in your phone (see step 2). If  
the Bluetooth feature was turned off or was turned  
on only temporarily, you may need to restart the  
Bluetooth feature (see step 2) and pair your phone  
and hands-free speaker again (see step 3).  
Support.  
If you need more help, contact us at  
1-877-MOTOBLU or visit us at  
TURNING HANDS-FREE  
SPEAKER ON AND OFF  
To turn hands-free speaker on, press and hold  
the Power button until the indicator light turns  
purple.Then, release the button.  
Features and  
Functions Guide  
T305  
Portable Bluetooth®  
Hands-Free Speaker  
Note: Hands-free speaker may take up to 3 to 4 seconds to  
turn on.  
To turn your hands-free speaker off, press and  
hold the Power button until the indicator light  
turns purple and then turns off.  
IMPORTANT:  
Be sure to first follow the  
To conserve battery power, your hands-free  
speaker will turn off when not connected to  
your phone for more than 30 minutes.  
Power Button  
Indicator Light  
Quick Start Guide  
on the reverse side  
of this guide  
to complete initial setup  
of yourT305.  
INSTALLING HANDS-FREE  
INSTALLING HANDS-FREE  
SPEAKER INYOUR CAR  
Follow these steps to install your hands-free  
speaker in your car:  
SPEAKER INYOUR CAR  
Continued  
Slide the visor clip onto your sun visor.  
2
Slide the visor clip onto the mounting bracket  
on the bottom of the hands-free speaker. To  
do this, place the loop end first onto the  
hands-free speaker and slide forward as  
shown below.  
1
When installed, the Power button must be  
facing toward you as shown.  
The visor clip is reversible to allow placement  
of your hands-free speaker on either the front  
or the back of your cars sun visor.  
ADJUSTING HANDS-FREE  
SPEAKERVOLUME  
European Union Directives  
Conformance Statement  
Hereby, Motorola declares that this  
product is in compliance with:  
You can adjust hands-free speaker volume  
using the Volume buttons. To adjust volume,  
tap or press and hold button.  
• The essential requirements and  
other relevant provisions of Directive  
1999/5/EC.  
• All other relevant EU Directives.  
Volume  
Up (+)  
Button  
Product  
Approval  
Number  
0168  
Volume  
Down (-)  
Button  
The above gives an example of a typical Product  
Approval Number.  
You can view your product’s Declaration of Conformity  
(DoC) to Directive 1999/5/EC (to R&TTE Directive) at  
www.motorola.com/rtte. To find your DoC, enter the  
product Approval Number from your product’s label in  
the “Search” bar on the web site.  
Note: Hands-free speaker volume cannot be adjusted  
during an incoming call.  
MAKING CALLS  
MAKING CALLS CONTINUED  
Function  
Action  
Function  
Action  
Make a voice dial call  
Tap the Call button  
and speak the  
name after the tone  
Answer a second  
incoming call  
Press and hold the  
Call button (places  
first call on hold)  
End a call  
Tap the Call button  
(if a call is on hold,  
tap twice to end all  
calls)  
Toggle between two  
active calls  
Press and hold  
the Call button  
Mute or unmute a call  
Tap both Volume  
buttons  
Receive a call  
Reject a call  
Tap the Call button  
Note: Some features are phone/network dependent.  
Tap either Volume  
button  
Note: When turning on your hands-free speaker during a  
phone call, audio is transferred automatically to your  
hands-free speaker (when your hands-free speaker and phone  
have previously been connected, and your phone supports  
this feature).  
Redial last call  
Press and hold the  
Call button until you  
hear a beep  
Note:YourT305 supports both Handsfree and Headset  
Profiles. Accessing call functions depends upon which  
profile your phone supports. See your phone's user's guide  
for more information.  
INDICATOR LIGHTS  
AUDIOTONES  
With the Charger Plugged In  
The audio tones provide information about your  
hands-free speaker status.  
Indicator Light  
Status  
Note: Charging status not displayed when hands-free  
speaker is in use.  
AudioTone  
Status  
Single high tone when  
pressing Volume button  
Volume at minimum  
or maximum  
Steady red  
Steady blue  
Charging  
Charging complete  
Five rapid high tones  
repeated every 60 sec.  
Low battery  
With No Charger Plugged In  
No audio indications;  
deteriorating quality  
Out of range  
Indicator Light  
Status  
Ring tone  
Incoming call  
Off  
Power off  
Single high tone  
Single low tone  
Pairing confirmation  
Voice activation  
Steady purple  
Steady blue  
Quick red flash  
Powering up  
Pairing mode  
Battery low  
Pairing successful  
Dual high/low tone  
(phone dependent)  
Voice tag not  
recognized  
Blue with quick  
purple flashes  
Single high tone  
Low to high tone  
End call  
Phone network  
not available  
Slow blue pulse  
Blue flash  
Connected (on a call)  
Standby (not on call)  
Incoming call  
Two ascending tones  
Two descending tones  
Mute enabled  
Mute disabled  
Quick blue flash  
Slow purple pulse  
Muted  

Research In Motion Blackberry Bluetooth Headset HS 500 User Manual
RCA BRC3109 User Manual
Pelco Car Satellite Radio System C538M User Manual
Panasonic PV D417 User Manual
Panasonic Camcorder HC V700M User Manual
Nikon Sporter EX 10x50 User Manual
Marshall electronic M LCD7 HDMI B C511 User Manual
Kramer Electronics Camcorder VS 6EIII User Manual
Kenwood eXcelon KDC X693 User Manual
JVC GZ MG30EK User Manual